Ultrasensitive detection of SARS-CoV-2 S protein with aptamers biosensor based on surface-enhanced Raman scattering.

A rapid and accurate diagnostic modality is essential to prevent the spread of SARS-CoV-2. In this study, we proposed a SARS-CoV-2 detection sensor based on surface-enhanced Raman scattering (SERS) to achieve rapid and ultrasensitive detection. The sensor utilized spike protein deoxyribonucleic acid aptamers with strong affinity as the recognition entity to achieve high specificity. The spherical cocktail aptamers-gold nanoparticles (SCAP) SERS substrate was used as the base and Au nanoparticles modified with the Raman reporter molecule that resonates with the excitation light and spike protein aptamers were used as the SERS nanoprobe. The SCAP substrate and SERS nanoprobes were used to target and capture the SARS-CoV-2 S protein to form a sandwich structure on the Au film substrate, which can generate ultra-strong "hot spots" to achieve ultrasensitive detection. Analysis of SARS-CoV-2 S protein was performed by monitoring changes in SERS peak intensity on a SCAP SERS substrate-based detection platform. This assay detects S protein with a LOD of less than 0.7 fg mL-1 and pseudovirus as low as 0.8 TU mL-1 in about 12 min. The results of the simulated oropharyngeal swab system in this study indicated the possibility of it being used for clinical detection, providing a potential option for rapid and accurate diagnosis and more effective control of SARS-CoV-2 transmission.

Rapid Point-of-Care Assay by SERS Detection of SARS-CoV-2 Virus and Its Variants.

Addressing the spread of coronavirus disease 2019 (COVID-19) has highlighted the need for rapid, accurate, and low-cost diagnostic methods that detect specific antigens for SARS-CoV-2 infection. Tests for COVID-19 are based on reverse transcription PCR (RT-PCR), which requires laboratory services and is time-consuming. Here, by targeting the SARS-CoV-2 spike protein, we present a point-of-care SERS detection platform that specifically detects SARS-CoV-2 antigen in one step by captureing substrates and detection probes based on aptamer-specific recognition. Using the pseudovirus, without any pretreatment, the SARS-CoV-2 virus and its variants were detected by a handheld Raman spectrometer within 5 min. The limit of detection (LoD) for the pseudovirus was 124 TU µL-1 (18 fM spike protein), with a linear range of 250-10,000 TU µL-1. Moreover, this assay can specifically recognize the SARS-CoV-2 antigen without cross reacting with specific antigens of other coronaviruses or influenza A. Therefore, the platform has great potential for application in rapid point-of-care diagnostic assays for SARS-CoV-2.

Elucidating the Effect of Nanoscale Receptor-Binding Domain Organization on SARS-CoV-2 Infection and Immunity Activation with DNA Origami.

Multivalent display of SARS-CoV-2 RBDs (receptor-binding domains, prime proteins for viral infection and as vaccine immunogens) affects infectivity and as immunogens on a virus-like particle (VLP) can enhance immune response. However, the viral attachment and immune response initiated by the copy number and distribution pattern of SARS-CoV-2 RBDs remain poorly understood. Here, we organize SARS-CoV-2 RBDs on DNA nanoballs of ∼74 nm diameter by an aptamer-guided assembly for a systematic interrogation. We find that both the affinity and the rate of the DNA-based VLP binding to the host cell increase with the RBD number (10-90). In addition, a concentrated RBD distribution promotes faster and stronger interaction to the host cell than an even RBD distribution. Moreover, it is interesting to learn that the immunity activation does not increase linearly with RBD numbers on the VLP. As few as 20 evenly distributed RBDs per VLP can elicit up to 86% immunity of macrophage cells. Overall, the work provides a new tool to study SARS-CoV-2 infection and VLP-based immunity activation, which should deepen our understanding of viral infection and facilitate the development of highly effective antiviral vaccines.

Mechanosensing view of SARS-CoV-2 infection by a DNA nano-assembly.

The mechanical force between a virus and its host cell plays a critical role in viral infection. However, characterization of the virus-cell mechanical force at the whole-virus level remains a challenge. Herein, we develop a platform in which the virus is anchored with multivalence-controlled aptamers to achieve transfer of the virus-cell mechanical force to a DNA tension gauge tether (Virus-TGT). When the TGT is ruptured, the complex of binding module-virus-cell is detached from the substrate, accompanied by decreased host cell-substrate adhesion, thus revealing the mechanical force between whole-virus and cell. Using Virus-TGT, direct evidence about the biomechanical force between SARS-CoV-2 and the host cell is obtained. The relative mechanical force gap (<10 pN) at the cellular level between the wild-type virus to cell and a variant virus to cell is measured, suggesting a possible positive correlation between virus-cell mechanical force and infectivity. Overall, this strategy provides a new perspective to probe the SARS-CoV-2 mechanical force.

Spatial- and Valence-Matched Neutralizing DNA Nanostructure Blocks Wild-Type SARS-CoV-2 and Omicron Variant Infection.

Natural ligand-receptor interactions that play pivotal roles in biological events are ideal models for design and assembly of artificial recognition molecules. Herein, aiming at the structural characteristics of the spike trimer and infection mechanism of SARS-CoV-2, we have designed a DNA framework-guided spatial-patterned neutralizing aptamer trimer for SARS-CoV-2 neutralization. The ∼5.8 nm tetrahedral DNA framework affords precise spatial organization and matched valence as four neutralizing aptamers (MATCH-4), which matches with nanometer precision the topmost surface of SARS-CoV-2 spike trimer, enhancing the interaction between MATCH-4 and spike trimer. Moreover, the DNA framework provides a dimensionally complementary nanoscale barrier to prevent the spike trimer-ACE2 interaction and the conformational transition, thereby inhibiting SARS-CoV-2-host cell fusion and infection. As a result, the spatial- and valence-matched MATCH-4 ensures improved binding affinity and neutralizing activity against SARS-CoV-2 and its varied mutant strains, particularly the current Omicron variant, that are evasive of the majority of existing neutralizing antibodies. In addition, because neutralizing aptamers specific to other targets can be evolved and assembled, the present design has the potential to inhibit other wide-range and emerging pathogens.

Spatially Patterned Neutralizing Icosahedral DNA Nanocage for Efficient SARS-CoV-2 Blocking.

Broad-spectrum anti-SARS-CoV-2 strategies that can inhibit the infection of wild-type and mutant strains would alleviate their threats to global public health. Here, we propose an icosahedral DNA framework for the assembly of up to 30 spatially arranged neutralizing aptamers (IDNA-30) to inhibit viral infection. Each triangular plane of IDNA-30 is composed of three precisely positioned aptamers topologically matching the SARS-CoV-2 spike trimer, thus forming a multivalent spatially patterned binding. Due to its multiple binding sites and moderate size, multifaced IDNA-30 induces aggregation of viruses. The rigid icosahedron framework afforded by four helixes not only forms a steric barrier to prevent the virus from binding to the host but also limits the conformational transformation of the SARS-CoV-2 spike trimer. Combining multivalent topologically patterned aptamers with structurally well-defined nanoformulations, IDNA-30 exhibits excellent broad-spectrum neutralization against SARS-CoV-2, including almost completely blocking the infection of Omicron pseudovirus. Overall, this multidimensional neutralizing strategy provides a new direction for the assembly of neutralizing reagents to enhance their inhibitory effect against SARS-CoV-2 infection and combat other disease-causing viruses.

Cover Feature: Structure‐ and Interaction‐Based Design of Anti‐SARS‐CoV‐2 Aptamers (Chem. Eur. J. 12/2022)

Digital drug design reveals DNA aptamers binding SARS‐CoV‐2: A hybrid in silico et vitro approach, structure and interaction‐based drug design, has been developed to create highly specific DNA aptamers for the receptor‐binding domain of the SARS‐CoV‐2 spike protein. The structure and binding affinity of the aptamers were validated by small‐angle X‐ray scattering, flow cytometry, and fluorescence polarization. This approach offers a blueprint for the straightforward design of targeting molecules for new pathogens and emerging variants. More information can be found in the Research Article by Y. Alexeev, M. V. Berezovski, A. S. Kichkailo, et al. (DOI: 10.1002/chem.202104481).

Spherical neutralizing aptamer suppresses SARS-CoV-2 Omicron escape.

Recently, the SARS-CoV-2 Omicron has spread very quickly worldwide. Several studies have indicated that the Omicron variant causes a substantial evasion of the humoral immune response and the majority of existing SARS-CoV-2 neutralizing antibodies. Here we address this challenge by applying a spherical cocktail neutralizing aptamer-gold nanoparticle (SNAP) to block the interaction of Omicron receptor binding domain (RBD) and host Angiotensin-Converting Enzyme 2 (ACE2). With the synergetic blocking strategy based on multivalent multisite aptamer binding and steric hindrance by the size-matched gold scaffold, the SNAP conjugate tightly binds to Omicron RBD with a dissociation constant of 13.6 pM, almost completely blocking the infection of Omicron pseudovirus with a half-maximal inhibitory concentration of 35.9 pM. Overall, the SNAP strategy not only fills the gap of the humoral immune evasion caused by clustered mutations on Omicron, but also provides a clue for the development of new broad neutralizing reagents against future variants.

Structure- and Interaction-Based Design of Anti-SARS-CoV-2 Aptamers.

Aptamer selection against novel infections is a complicated and time-consuming approach. Synergy can be achieved by using computational methods together with experimental procedures. This study aims to develop a reliable methodology for a rational aptamer in silico et vitro design. The new approach combines multiple steps: (1) Molecular design, based on screening in a DNA aptamer library and directed mutagenesis to fit the protein tertiary structure; (2) 3D molecular modeling of the target; (3) Molecular docking of an aptamer with the protein; (4) Molecular dynamics (MD) simulations of the complexes; (5) Quantum-mechanical (QM) evaluation of the interactions between aptamer and target with further analysis; (6) Experimental verification at each cycle for structure and binding affinity by using small-angle X-ray scattering, cytometry, and fluorescence polarization. By using a new iterative design procedure, structure- and interaction-based drug design (SIBDD), a highly specific aptamer to the receptor-binding domain of the SARS-CoV-2 spike protein, was developed and validated. The SIBDD approach enhances speed of the high-affinity aptamers development from scratch, using a target protein structure. The method could be used to improve existing aptamers for stronger binding. This approach brings to an advanced level the development of novel affinity probes, functional nucleic acids. It offers a blueprint for the straightforward design of targeting molecules for new pathogen agents and emerging variants.

Spherical Neutralizing Aptamer Inhibits SARS-CoV-2 Infection and Suppresses Mutational Escape.

New neutralizing agents against SARS-CoV-2 and associated mutant strains are urgently needed for the treatment and prophylaxis of COVID-19. Herein, we develop a spherical cocktail neutralizing aptamer-gold nanoparticle (SNAP) to block the interaction between the receptor-binding domain (RBD) of SARS-CoV-2 and host ACE2. With the multivalent aptamer assembly as well as the steric hindrance effect of the gold scaffold, SNAP exhibits exceptional binding affinity against the RBD with a dissociation constant of 3.90 pM and potent neutralization against authentic SARS-CoV-2 with a half-maximal inhibitory concentration of 142.80 fM, about 2 or 3 orders of magnitude lower than that of the reported neutralizing aptamers and antibodies. More importantly, the synergetic blocking strategy of multivalent multisite binding and steric hindrance ensures broad neutralizing activity of SNAP, almost completely blocking the infection of three mutant pseudoviruses. Overall, the SNAP strategy provides a new direction for the development of antivirus agents against SARS-CoV-2 and other emerging coronaviruses.

A microfluidic-integrated lateral flow recombinase polymerase amplification (MI-IF-RPA) assay for rapid COVID-19 detection.

The COVID-19 pandemic, caused by SARS-CoV-2, currently poses an urgent global medical crisis for which there remains a lack of affordable point-of-care testing (POCT). In particular, resource-limited areas need simple and easily disseminated testing solutions to manage the outbreak. In this work, a microfluidic-integrated lateral flow recombinase polymerase amplification (MI-IF-RPA) assay was developed for rapid and sensitive detection of SARS-CoV-2, which integrates the reverse transcription recombinase polymerase amplification (RT-RPA) and a universal lateral flow (LF) dipstick detection system into a single microfluidic chip. The single-chamber RT-RPA reaction components are mixed with running buffer, and then delivered to the LF detection strips for biotin- and FAM-labelled amplified analyte sequences, which can provide easily interpreted positive or negative results. Testing requires only a simple nucleic acid extraction and loading, then incubation to obtain results, approximately 30 minutes in total. SARS-CoV-2 armored RNA particles were used to validate the MI-IF-RPA system, which showed a limit of detection of 1 copy per µL, or 30 copies per sample. Chip performance was further evaluated using clinically diagnosed cases of COVID-19 and revealed a sensitivity of 97% and specificity of 100%, highly comparable to current reverse transcription-polymerase chain reaction (RT-PCR)-based diagnostic assays. This MI-IF-RPA assay is portable and comprises affordable materials, enabling mass production and decreased risk of contamination. Without the need for specialized instrumentation and training, MI-IF-RPA assay can be used as a complement to RT-PCR for low-cost COVID-19 screening in resource-limited areas.

Innenrücktitelbild: Aptamer Blocking Strategy Inhibits SARS‐CoV‐2 Virus Infection

Eine Aptamer‐Blockierungsstrategie zur Hemmung der SARS‐CoV‐2‐Infektion wird von Honglin Chen, Yanling Song, Chaoyong Yang et al. im Forschungsartikel auf S. 10354 demonstriert. Eine Aptamer‐Sonde wurde so konstruiert, dass sie an das Spike‐Protein von SARS‐CoV‐2 bindet, was die Infektion des Virus hemmt, indem es die Interaktion des Virus mit ACE2‐Rezeptoren auf der Zellmembran blockiert.

Aptamer Blocking Strategy Inhibits SARS‐CoV‐2 Virus Infection

The COVID‐19 pandemic caused by SARS‐CoV‐2 is threating global health. Inhibiting interaction of the receptor‐binding domain of SARS‐CoV‐2 S protein (SRBD) and human ACE2 receptor is a promising treatment strategy. However, SARS‐CoV‐2 neutralizing antibodies are compromised by their risk of antibody‐dependent enhancement (ADE) and unfavorably large size for intranasal delivery. To avoid these limitations, we demonstrated an aptamer blocking strategy by engineering aptamers’ binding to the region on SRBD that directly mediates ACE2 receptor engagement, leading to block SARS‐CoV‐2 infection. With aptamer selection against SRBD and molecular docking, aptamer CoV2‐6 was identified and applied to prevent, compete with, and substitute ACE2 from binding to SRBD. CoV2‐6 was further shortened and engineered as a circular bivalent aptamer CoV2‐6C3 (cb‐CoV2‐6C3) to improve the stability, affinity, and inhibition efficacy. cb‐CoV2‐6C3 is stable in serum for more than 12 h and can be stored at room temperature for more than 14 days. Furthermore, cb‐CoV2‐6C3 binds to SRBD with high affinity (Kd=0.13 nM) and blocks authentic SARS‐CoV‐2 virus with an IC50 of 0.42 nM.

Aptamer Blocking Strategy Inhibits SARS-CoV-2 Virus Infection

Eine Aptamer-Blockierungsstrategie zur Hemmung der SARS-CoV-2-Infektion wird von Honglin Chen, Yanling Song, Chaoyong Yang et?al. in ihrem Forschungsartikel demonstriert (DOI: 10.1002/ange.202100225). Eine Aptamer-Sonde wurde so konstruiert, dass sie an das Spike-Protein von SARS-CoV-2 bindet, was die Infektion des Virus hemmt, indem es die Interaktion des Virus mit ACE2-Rezeptoren auf der Zellmembran blockiert.

Aptamer Blocking Strategy Inhibits SARS-CoV-2 Virus Infection.

The COVID-19 pandemic caused by SARS-CoV-2 is threating global health. Inhibiting interaction of the receptor-binding domain of SARS-CoV-2 S protein (SRBD ) and human ACE2 receptor is a promising treatment strategy. However, SARS-CoV-2 neutralizing antibodies are compromised by their risk of antibody-dependent enhancement (ADE) and unfavorably large size for intranasal delivery. To avoid these limitations, we demonstrated an aptamer blocking strategy by engineering aptamers' binding to the region on SRBD that directly mediates ACE2 receptor engagement, leading to block SARS-CoV-2 infection. With aptamer selection against SRBD and molecular docking, aptamer CoV2-6 was identified and applied to prevent, compete with, and substitute ACE2 from binding to SRBD . CoV2-6 was further shortened and engineered as a circular bivalent aptamer CoV2-6C3 (cb-CoV2-6C3) to improve the stability, affinity, and inhibition efficacy. cb-CoV2-6C3 is stable in serum for more than 12 h and can be stored at room temperature for more than 14 days. Furthermore, cb-CoV2-6C3 binds to SRBD with high affinity (Kd =0.13 nM) and blocks authentic SARS-CoV-2 virus with an IC50 of 0.42 nM.

Discovery of Aptamers Targeting the Receptor-Binding Domain of the SARS-CoV-2 Spike Glycoprotein.

The World Health Organization has declared the outbreak of a novel coronavirus (SARS-CoV-2 or 2019-nCoV) as a global pandemic. However, the mechanisms behind the coronavirus infection are not yet fully understood, nor are there any targeted treatments or vaccines. In this study, we identified high-binding-affinity aptamers targeting SARS-CoV-2 RBD, using an ACE2 competition-based aptamer selection strategy and a machine learning screening algorithm. The Kd values of the optimized CoV2-RBD-1C and CoV2-RBD-4C aptamers against RBD were 5.8 nM and 19.9 nM, respectively. Simulated interaction modeling, along with competitive experiments, suggests that two aptamers may have partially identical binding sites at ACE2 on SARS-CoV-2 RBD. These aptamers present an opportunity for generating new probes for recognition of SARS-CoV-2 and could provide assistance in the diagnosis and treatment of SARS-CoV-2 while providing a new tool for in-depth study of the mechanisms behind the coronavirus infection.